ribbon blender, ribbon mixer, ribbon mixing machine, mixer, mixing machine, mixing equipment

homeemialsitemap
PRODUCTS LIST

Tablet Press

Capsule Machine

Mixer

Granulator

Dryer

Pulverizer

Screening Machine

Packing Machine

Ampoule Filling Machine

Coating Machine

Ointment Equipment

Syringe Assembling Machine

Packing Material

PRODUCTS
Mixer  >  Ribbon Blender

RIBBON BLENDER

RIBBON BLENDERScope of Application:
In the U shape container, there are positive and negative ribbons. Special proportion of the two ribbons can be rectified with the kind of material, quantity and the proportion of body. The ribbon blender has good effect on mixing viscosity or cohesion powder.

Characteristic:
A, Fast mixing speed can satisfy the rigorous demand of mixing the materials with different physical property.
B, The rotation is under critical speed, which will reduce the effect of fragmentation to the material(e. G. Crystal particle)
C, Lower height of the container is convenient for installation.
D, The positive and negative ribbons are set up at he same level, forming a mixing environment of low power but high efficiency.

Ribbon BlenderWorking Principle:
A, The horizontal axes make the materials move up and down.
B, The outer ribbon gathering the material from sides to center and the inner ribbon pushing the material from center to sides.
C, Every screw makes the materials do axial and radial movement, the materials do relative cyclical movement so to gain the intensive mixings ends.

Seal:
Our company provides various sealing devices according to difference of materials. The normal sealing structure is stuff seal and also called TEFLON seal. After using for a period, user(s) should fasten and enhance it. However, the dynamic seal has a long-time sealing effect and is especially fit for the powder, liquid.

Feeding inlet on the body cover:
Two types:
A, used in the whole mixing/ blending process: In order to connect the feeding device, we design the connecting mouth
B, used in the manual feeding: In order to operate and clean inside of the body, we design feeding inlet(s) or door(s).
Discharging:
There is a discharging valve at the bottom of mixer body. When mixing different types of materials, we use flat discharging valve. The operation of the discharging valve should be convenient and there are three types: Manual, air driven and electricity driven. The manual discharging is operated on the valve and the open extent is controlled by hand freely. The air driven discharging valve, assembled with cylinder, work under the air pressure. The electricity driven discharging valve works under control of electricity control box.

Temperature control:
We can use a jacket when heating, cooling or heat-preservation is needed.
The jacket is filled by circulation and heat conduction medium and can not bear high pressure. There are two kinds of heat conduction medium: Water and oil. The water temperature should be limited in 90 and the oil temperature should be limited in 300. The jacket coordinates the external heating system, the expulsion system, the pipeline to carry on to the material continues and even temperature processing.

Specification:

Model
Total Volume (M³)
Loads coefficient
Motor power (KW)
Size (LXWXH) (mm)
Net weight (kg)
LT-0.1
0.1
0.4-0.8
3
1190×740×770
330
LT-0.3
0.3
0.4-0.8
4
2030×630×980
720
LT-0.5
0.5
0.4-0.8
7.5
2320×730×1130
980
LT-1
1
0.4-0.8
11
2800×920×1320
1700
LT-1.5
1.5
0.4-0.8
11
3180×1020×1550
1800
LT-2
2
0.4-0.8
15
3310×1120×1640
2100
LT-3
3
0.4-0.8
18.5
3750×1290×1820
3000
LT-4
4
0.4-0.8
22
4220×1400×1990
3980
LT-5
5
0.4-0.8
22
4220×1500×2100
4620
LT-6
6
0.4-0.8
30
4700×1610×2260
6180
LT-8
8
0.4-0.8
37
4420×2150×2470
8200
LT-10
10
0.4-0.8
45
5520×2960×2720
8920
LT-12
12
0.4-0.8
45
5720×3010×2840
9520
LT-15
15
0.4-0.8
55
5840×3540×2940
9950

ribbon blender, ribbon mixer, ribbon mixing machine

HOME  |  ABOUT US  |  PRODUCTS  |  CONTACT US  |  E-MAIL  |  SITEMAP
Tel : +86 - 0419 - 2305869    Fax : +86 - 0419 - 2305869    E-Mail : pharmao@hotmail.com    frank@pharmao.com
Copyright © 2010 Pharmao industries CO.,LTD. All Rights Reserved.