AGF Type 6-head Ampoule Filling and Sealing Machine

The 6-heads ampoule filling and sealing machine AGF is more suitable for the technological requirements of water and powder injections. It features high capacity, good quality, stable operation, and so it is ideal equipment for ampoule medicine production.

l Upside of the ampoule filling and sealing machine is set of one hundred stage laminar flow purify in protection.

l There is set to prevent from filling on filling and sealing machine

l Liquefaction gas and oxygen is adopted as filling burning gas on Filling and sealing machine.

l Stand-rotation sealing is adopted on Filling and sealing machine, sealing quality is good.

l Tiny-adjustment is adopted for filling on filling and sealing machine; error is smaller in filling value.

l Under the control of buffer, filling and sealing machine can mater with production.

Operating Theory
Ampoule-bottles are putted into passage for bottle entrance in bulk by the transmission belt of AGF mold 6-heads ampoule filling and sealing machine, under the control of barrier six ampoule-bottles are segregated every time, then carried to filling unit and stealing by teeth-plate in interval. The filling and stealing is under the protect of one hundred stage lamina flow. Sealed ampoule-bottle is putted outside bottle-pusher.

Technical Data:
1. Power: 380V, 50Hz

2. Gross power of motor: 1.5kw

3. Volume of liquid gas: 1.2m³/h

4. Volume of oxygen gas: 0.6m³/h

5. Speed control: 30 ~ 36 r/min (staples speed adjustment).

6. Weight: about 1400kg

7. Overall size (length * width * height): 2500*1200*2250m

Output:
Ampoule: 1ml: 11500-pcs/h, 2ml: 11500 pcs/h, 5ml: 10000 pcs/h, 10ml: 8000pcs/h, 20ml: 6000 pcs/h

Operating procedure
l Before starting up, washing the filling pump, sampling and test, the clarity must be accord with the standard specified by the pharmacopoeia.

l Adjust the pump stroke with a fine-regulating bolt, until get the best stroke, then adjust the dosage with fine regulation switch, make it up to standard and without any dripping.

l Set the fillers’ position correctly in order to avoid I touching ampoule neck.

l Before ignition, make sure that oxygen, nitrogen, liquefied, natural gas and the air for suction is enough. Fist, open the burning gas valve, then open the oxygen valve and adjust the valve to have fire properly. Before stop machine, should turn off the oxygen valve. After about a minute, close the gas to prevent the return fire burning down the tubes.